Search the whole station

A12-C Semi-Automatic Bevel Tube Laser Cutter

Precision bevel cutting with zero-remnant options for suitable parts

15–120 mm metal tubes
Up to ±45° bevels · 3000W reference configuration

Cut holes, slots, tube-end profiles and weld-preparation bevels on one machine.

Send Your Tube DrawingView specifications ↓

See the A12-C at work

From Anji Qingyun Intelligent Equipment Co., Ltd., the A12-C bevel tube laser cutter suits small orders organized in batches, with automatic feeding and zero-remnant options for suitable parts. The 3000W bevel configuration handles Ø15–120 mm round tubes and 15×15–120×120 mm square tubes. Holes, slots, end profiles and weld-preparation bevels are cut on the same machine.

Our in-house XTUBECUT bus control system is included. Operators can get started with basic training. Its controls coordinate feeding, clamping and cutting, with preset processes available for different jobs.

Ø15–120 mm Round tube range

±45° Maximum bevel angle

110 kg Reference chuck load

3300–6500 mm Stock length for rack feeding

Arrange the batch.
The machine feeds each tube to the chuck.

Operators line up round, square or rectangular tubes on the rack. The machine feeds them to the chuck, so each tube does not need to be loaded by hand. The 3000W configuration accepts stock lengths of 3300–6500 mm. Wide- and narrow-side recognition helps orient rectangular tubes. Channels, angles and other irregular profiles require manually assisted loading.

  1. Arrange the stockPrepare tubes on the rack for each order
  2. Automatic feedingFeed the tube to the chuck position
  3. Clamp and cutCenter and clamp the tube, then cut
A12-C loading rack and cutting system
3300–6500 mm Stock length110 kg Reference chuck load

Watch the A12-C product film

Laser bevel cutting on a metal tube

Cut the bevel.
Make joint fit-up easier.

Supports ±45° bevel cutting. Cut angled faces directly on the tube to prepare mitered, joined and intersecting connections.

View cutting ranges and wall thicknesses ↓

Bevels, holes and slots on one machine

±45° bevel cutting prepares tube edges for welding. Cutting angled faces directly reduces separate grinding and preparation for miters, joined sections and intersecting contours, making fit-up easier. Confirm actual cycle time and cut quality with a sample test. The autofocus cutting head adjusts focus for the programmed task.

Automatic clamping and servo tube support

Pneumatic chucks clamp at the push of a button and center the tube automatically. Powered servo supports carry longer stock to limit sag that can affect accuracy. Reference chuck load is 110 kg. Adjust rotation and motion settings as tube weight increases.

A12-C chucks, supports and cutting head
XTUBECUT control screen on the A12-C

In-house bus control,
matched to the machine.

The configuration includes the compatible XTUBECUT bus control system, so QINGYUN machines do not require a separate third-party tube-cutting controller. Bus communication provides fast response with less wiring. The control logic matches the feeder, chucks and cutting mechanism. Software functions and service terms depend on the selected configuration and contract.

Preset processes and 3D toolpaths

The screen displays the 3D model and cutting path in real time, helping operators check contours and cutting order. Common processes are preset. For suitable parts, operators can call settings from the process library to reduce setup time. One-click fly cutting and bevel cutting also reduce repeated settings.

Short-remnant cutting

Cutting-head overtravel and chuck avoidance allow cuts closer to the clamped end, reducing unused stock. Reference remnant lengths for the 3000W dual-chuck configuration are shown below.

3000W dual-chuck remnant reference
Cutting method Reference remnant length
Straight cutting ≥70 mm
Bevel cutting ≥130 mm

Actual remnant length varies with tube shape, clamping, part nesting and cutting method. Zero-remnant cutting may be possible for certain parts and must be confirmed with a test on the actual tube.

Cutting range and specifications

A12-C | 3000W bevel tube laser cutter reference configuration
Item Reference specification
Round tube outside diameter Ø15–120 mm
Square tube size 15×15–120×120 mm
Minimum actual wall thickness ≥0.6 mm
Maximum bevel angle ±45°
Automatic feed length 3300–6500 mm
Manually loaded stock length 1000–7000 mm
Chuck load 110 kg
Machine positioning / repeat positioning accuracy ±0.05 / ±0.03 mm
Maximum acceleration 15,000 mm/s² (approx. 1.5G)
Machine weight Approx. 4 t
Overall dimensions (L×W×H) 9205×2709×2008 mm
Power supply 380 V, three-phase, 50/60 Hz

Motion figures are machine maxima, not cutting speeds for tubes of every weight. Machine positioning accuracy is not finished-part tolerance. Confirm the final configuration and results against the tube, clamping method and test cut.

Match the process to material and wall thickness

3000W wall-thickness reference by material and assist gas
Material / assist gas Straight-cut wall thickness Bevel-cut wall thickness
Stainless steel, carbon steel / air or nitrogen ≤5 mm 3.5 mm
Aluminum alloy / air or nitrogen ≤4.5 mm 3.2 mm
Carbon steel / oxygen, tube inside diameter >50 mm ≤12 mm 8.5 mm

Choose a loading rack for your production

A12-C and A12-CA loading comparison
Comparison A12-C arranged-rack feeding A12-CA belt-type automatic loading
Loading method Operators arrange tubes on the rack; the machine feeds them automatically Stock is placed in batches on the rack, which automatically loads regular tube profiles
Production fit Different batches organized by the operator Higher-volume runs of bundled stock with the same regular profile
3000W round tube range Ø15–120 mm Ø20–120 mm

Select either model according to tube shape, wall thickness, batch size and how stock is supplied on site. Minimum round-tube diameter is 15 mm for A12-C and 20 mm for A12-CA. Use the specifications for each model’s selected configuration.

Explore A12-CA automatic loading

From test cutting to delivery

Anji Qingyun Intelligent Equipment Co., Ltd. operates a 50,000 m² production site and installs more than 100 machines a year.

Delivery includes operation, wiring and pneumatic documentation. English documentation, remote commissioning and training are available for overseas projects. Technical requests receive a response within 24 hours. The machine has a one-year warranty and the laser source a two-year warranty, subject to the contract. CE documentation and relevant SGS reports are available for purchasing review. Check the holder, applicable models and configuration against the original documents.

At a furniture factory in Zhejiang

QINGYUN supplier documentation

The factory has passed an SGS assessment and holds ISO 9001 quality management certification. CE documentation is available for applicable products.

We use 6S workplace management to control production, quality and product safety and support consistent equipment and service delivery.

Request Documentation

Questions before choosing a configuration

Check loading, stock dimensions and joint requirements against your actual orders.

Do operators still need to place each tube in the chuck?

No. The operator arranges tubes on the rack, and the machine feeds them to the chuck. Irregular profiles require manual assistance during loading.

Do I need to buy the control system separately?

This configuration includes the compatible XTUBECUT bus control system for basic cutting. For higher-volume work, QINGYUN’s matching nesting software is available as an option to improve throughput. A separate third-party tube-cutting controller is not required. Functions, upgrades and service terms are defined in the contract.

Can every tube and part be cut with zero remnant?

No. Reference remnant lengths for standard dual-chuck cutting are ≥70 mm for straight cuts and ≥130 mm for bevel cuts. Zero-remnant cutting is possible for some parts, depending on tube shape, clamping and part nesting.

How do I choose between A12-C and A12-CA?

The A12-C has an arranged loading rack that holds six tubes, then feeds them automatically to the chuck. This suits production organized in batches. The A12-CA is intended for fully automatic loading of bundled stock for higher-volume runs. Compare stock dimensions, feeding pace, batch size and changeover needs. In the 3000W configurations, minimum round-tube diameters are 15 mm and 20 mm respectively.

What do you need for a quotation and test cut?

Please send the material, section size, wall thickness, stock length, weight per tube, part drawings and batch size. For bevel cuts, include the joint angle and cut-edge requirements.

Request an A12-C configuration and free sample cut

Send your tube specifications and part drawings. We will review feeding, control-system processes, bevels and remnant length before arranging a sample test cut and quotation.

Send Drawings for a Test Cut

Free Consultation


The prev: The next: